| The ECG AM-30 is a full function Analog Multimeter and offers temperature measurements.
Analog Voltage Meter ECG AM-30
Features:
- 3% DC Accuracy FS
- 5″ Mirrored Scale
- 30K Ohm/V DC, 10K Ohm/V AC In put Sensitivity
- Fuse and Diode Protection
- 10 Amp DC Range
- 1000 Volts AC/DC
- Transistor Test
- Battery Test
- Continuity Buzzer
- Tilt Stand/Carry Handle
- 90-Day Limited Warranty
Test Leads (ML-43), Temperature Probe (TL-30), Fuse and Operating Instructions Included.
Specifications:
General
Front Panel Controls: Range selector switch with “OFF” position, 0 Ohm adjust/temperature calibration, 0 Ohm calibration switch
Movement: 90 deg arc, 25uA movement
Scales(8): One scale for OHMS, three scales for AC/DC, one scale for dB, two scales for temperature, one scale for battery test
Scale Length: 5″
Operation Position: Horizontal or vertical, rubber pads to prevent slipping on moderate horizontal slopes
Power: 9V (NEDA 1604) and 1.5V AA(2) batteries (not included)
Movement and Indicator Protection: Fuse (0.5A, 250V)
Operating Temperature: 18 deg C to 25 deg C for rated accuracy
Dimensions, Weight: 4.8″ wide x 6.9″ long x 1.9″ thick (127mm x 175mm x 48mm) net weight 14oz. (422g)
DC Voltage
Ranges: 0-0.6, 3, 12, 60, 300, 1000V
Input Impedance: 30K Ohm per Volt
Rated Accuracy: +/-3% of full scale
DC Current
Ranges: 120u, 13m, 30m, 300m, 10A
Rated Accuracy: +/-3% of full scale
AC Voltage
Ranges: 0-12, 30, 120, 300, 1000V
Input Impedance: 10K Ohm per Volt
Rated Accuracy: +/-4% of full scale
Resistance
Ranges:
R x 1 0-5k Ohm
R x 100 0-500k Ohm
R x 1k 0-5M Ohm
R x 10k 0-50M Ohm
Rated Accuracy: 3 deg arc
Decibels
Ranges:
-10dB to +24dB on 12V AC range
-2dB to 32dB
8dB to 44dB
20dB to +52dB
30dB to +62dB
0dB referenced to 1 milliwatt at 600 Ohm
Temperature
Ranges: -50 degC to +260 degC (-60 degF to 400 degF)
Battery Test
Ranges: 1.5V AA, 9V
THIS ITEM HAS BEEN DISCONTINUED BY NTE.
Order No. AM-30
Authorized NTE Distributor |
